亚洲欧美精品沙发,日韩在线精品视频,亚洲Av每日更新在线观看,亚洲国产另类一区在线5

<pre id="hdphd"></pre>

  • <div id="hdphd"><small id="hdphd"></small></div>
      學習啦>學習電腦>電腦入門>

      Cisco3750交換機密碼初始化的教程

      時間: 志藝942 分享

        你還在為不知道Cisco3750交換機密碼初始化的教程而煩惱么?接下來是小編為大家收集的Cisco3750交換機密碼初始化的教程,希望能幫到大家。

        Cisco3750交換機密碼初始化的教程的方法

        分類: 系統運維

        1. 連接交換機的console口到終端或PC仿真終端。用無Modem的直連線連接PC的串行口到交換機的console口。

        2. 拔掉交換機的電源.

        3. 按住交換機上的Mode按鈕,與此同時,重新插上交換機的電源線.當交換機上SYST的LED長期亮的時候,可以松開Mode按鈕。

        4. 再通過超級終端連接交換機。

        5. 交換機有如下顯示:

        switch:

        :switch: flash_init

        初始化flash文件系統

        Initializing Flash...

        flashfsCisco3750交換機密碼初始化的教程: 83 files, 4 directories

        flashfsCisco3750交換機密碼初始化的教程: 0 orphaned files, 0 orphaned directories

        flashfsCisco3750交換機密碼初始化的教程: Total bytes: 15998976

        flashfsCisco3750交換機密碼初始化的教程: Bytes used: 6472704

        flashfsCisco3750交換機密碼初始化的教程: Bytes available: 9526272

        flashfsCisco3750交換機密碼初始化的教程: flashfs fsck took 8 seconds.

        ...done Initializing Flash.

        Boot Sector Filesystem (bs) installed, fsid: 3

        Setting console baud rate to 9600...

        switch: rename flash:config.text flash:config.old

        更名含有password的配置文件

        switch: boot

        啟動交換機

        Loading "flash:c3750-i9-mz.121-19.EA1d/c3750-i9-mz.121-19.EA1d.bin"...@@@@@@@@@@

        。。。。。。。。

        --- System Configuration Dialog ---

        Would you like to enter the initial configuration dialog? [yes/no]: yes

        您是否進入初始化配置對話,選Y

        At any point you may enter a question mark '?' for help.

        Use ctrl-c to abort configuration dialog at any prompt.

        Default settings are in square brackets '[]'.

        。。。。。

        Would you like to enter basic management setup? [yes/no]: yes

        您是否進入基本配置安裝,選Y

        Configuring global parameters:

        Enter host name [Switch]: zcomf10

        輸入設備的名字

        The enable secret is a password used to protect access to

        privileged EXEC and configuration modes. This password, after

        entered, becomes encrypted in the configuration.

        Enter enable secret: zcom:com

        輸入密文

        The enable password is used when you do not specify an

        enable secret password, with some older software versions, and

        some boot images.

        Enter enable password: 12345678

        輸入密碼(不能和密文相同)

        The virtual terminal password is used to protect

        access to the router over a network interface.

        Enter virtual terminal password: 87654321

        輸入虛擬終端的密碼(以備遠程登錄)

        Configure SNMP Network Management? [no]:

        詢問是否要設置路由器支持的各種網絡協議:

        Current interface summary

        。。。。。。。

        Enter interface name used to connect to the

        management network from the above interface summary: vlan1

        鍵入作為管理接口的接口名

        Configuring interface Vlan1:

        Configure IP on this interface? [yes]: Y (對Vlan1進IP配置)

        IP address for this interface: 192.168.10.1 (鍵入IP地址)

        Subnet mask for this interface [255.255.255.0] :255.255.255.0 (鍵入子網掩碼,或按回車鍵使用默認值)

        Class C network is 192.168.10.0, 24 subnet bits; mask is /24

        Would you like to enable as a cluster command switch? [yes/no]: no (n集群模式?)

        The following configuration command script was created:

        已建立以下配置信息

        hostname zcomf10

        enable secret 5 class="main">

      Cisco3750交換機密碼初始化的教程

      時間: 志藝942 分享

        enable password 12345678

        line vty 0 15

        password 87654321

        no snmp-server

        !

        no ip routing

        !

        interface Vlan1

        no shutdown

        ip address 192.168.10.1 255.255.255.0

        !

        interface GigabitEthernet1/0/1

        !

        interface GigabitEthernet1/0/2

        !

        。。。。。。。。

        end

        Cisco3750交換機密碼初始化的教程 Go to the IOS command prompt without saving this config.

        [1] Return back to the setup without saving this config.

        [2] Save this configuration to nvram and exit.

        這里有一個有趣的地方,那就是你能夠選擇進入命令行接口模式并放棄剛才的配置(0),你也能夠回頭重新再設置一遍(1),也能夠保存配置到NVRAM中并退出重啟(2)。這里我選擇的是0,我們將不保存剛才的配置并進入命令行接口模式(CLI)。接下來我們將介紹CLI。再重復一次,你可以在任何時候按下 Ctrl+C來退出安裝模式。

        Enter your selection [2]: 2

        Building configuration...

        [OK]

        Use the enabled mode 'configure' command to modify this configuration.

        zcomf10>en

        進入特權模式“en”或“enable”一樣

        Password:

        zcomf10#copy run

        zcomf10#copy running-config star

        zcomf10#copy running-config startup-config (退出,并保存到startup-config文件里:)

        Destination filename [startup-config]?

        Building configuration...

        [OK]

        zcomf10#reload (完成重啟)

        Proceed with reload? [confirm]

      看了“Cisco3750交換機密碼初始化的教程”還想看:

      1.修改路由器和交換機的密碼教程

      2.如何恢復Cisco 2960交換機密碼

      3.cisco思科交換機如何清除密碼

      4.CISCO系列交換機如何清空配置

      5.交換機如何使用

      6.忘記路由器與交換機密碼如何解決

      2742581